Spray Foam Insulation in Austin, TX

25+ years in the trade. Same crew from estimate to final walk.

Spray foam insulation Austin homeowners need most isn’t the kind contractors push hardest. If your attic hits 140° in July and your AC won’t quit, that’s the problem we fix. Free on-site estimate. Real numbers. No upselling.

Get a Free Estimate

Call 512-507-5247

Why Spray Foam Is Built for Austin Attics

Three things make Central Texas different from anywhere else this product gets installed.

The Attic Oven Effect

Austin attics regularly hit 140°F in July. Fiberglass slows that heat. Spray foam stops it at the building envelope, so the AC stops fighting the attic and starts cooling the house.

Air Sealing Reality

Fiberglass lets superheated air leak directly through every gap, penetration, and seam. Spray foam seals the envelope at every one of them. That’s the difference between insulation that works and insulation that’s just there.

Humidity & Moisture

Central Texas humidity wears down traditional insulation, causing it to sag and lose R-value over time. Closed-cell foam actively rejects moisture buildup. Open-cell allows the assembly to dry to the inside.

Austin Homes Need Spray Foam More Than Most

The standard builder-grade fiberglass just doesn’t cut it when it’s 105 degrees for 60 straight days. Here is the reality of traditional insulation versus professional foam application.

Central Texas summers are brutal on attics. We’ve measured 145°F and up in unconditioned attic spaces in July, and that heat has to go somewhere. It goes into your ceiling drywall. It goes into your ductwork. It goes into the air your AC is trying to cool. That’s why your unit runs all day and your bill keeps climbing.
Fiberglass slows the heat. Spray foam stops it. Open-cell foam seals the building envelope at every gap, penetration, and leak point. Closed-cell adds a vapor barrier and structural rigidity to that.

For most Austin homes, especially 1990s and newer construction with vented attics, the right move is converting that attic into a sealed, conditioned space. The AC stops fighting the attic and starts cooling the house. You feel it within the first month.

Open-cell vs closed-cell: what you actually need

Most homeowners researching spray foam insulation Austin ask us this on the first call, and most contractors answer it wrong on purpose. They push closed-cell because it costs more. If a contractor walks into your Austin attic and recommends closed-cell, ask why. There are real reasons (specific moisture issues, certain commercial builds, structural retrofit), but for a standard Round Rock or Cedar Park attic, open-cell is the right call at the right price.

Not sure which one fits your house? Our estimator will walk your attic and tell you straight. We don’t sell up.

Open-cell foam

Expands up to 100x to fill every void.
Excellent sound dampening.
Lower cost per board foot.
Best for interior walls, attics, and ceilings where moisture isn’t a direct threat.

Goes in attics, interior walls, and most residential applications. It expands big, fills cavities completely, and seals the building envelope. R-value is about 3.7 per inch. For an Austin attic, this is almost always the right product.

Closed-cell foam

Dense and rigid structure.
Acts as a complete moisture and vapor barrier.
Adds structural strength to the building assembly.
Best for crawl spaces, metal buildings, and any exposed exterior walls.

Denser, holds water out, and adds structural strength. R-value is about 6.5 per inch. It belongs in crawl spaces, exterior walls in flood-prone areas, metal buildings, and anywhere a vapor barrier is required. It costs roughly twice as much per board foot.

What spray foam insulation Austin homeowners actually pay

Most contractors hide pricing because they want you on the phone before you see numbers. We’d rather put it on the page.

Job minimum: $2,000 for spray foam. All pricing subject to change based on final on-site assessment.

The reason most contractors won’t put numbers on a page is that depth, access, prep work, and existing conditions all affect the final estimate. A 1,500 sq ft attic with easy access and clean joists is one number. The same attic with 30 years of compressed fiberglass and a rodent problem is a different number.

We give you the real estimate on-site after we have seen the job. The numbers above are what you can plan around.

2026 Spray Foam Insulation Costs

Foam Type	Depth	Price ($/sq ft)	Typical Use Case
Open-Cell	3.5″	$2.00	Standard attic encapsulation
Open-Cell	5.5″	$2.55	Higher-R attic, full-cavity wall
Closed-Cell	1″	$2.25	Crawl space vapor barrier
Closed-Cell	2″	$5.00	Crawl space full insulation, structural retrofit

Request Firm Quote

What Install Looks Like

Morning Arrival

Crew arrives, reviews scope, and sets up rig.

Prep & Protect

Floors, windows, and HVAC equipment are masked off.

Application

Foam sprayed to depth, coverage verified.

Curing & Trimming

Foam cures rapidly. Excess trimmed if needed.

Final Walk

Site cleanup. Final inspection with the homeowner.

The Full Version

Morning of the job. The crew arrives in the H&O truck. The same lead installer who walked your job at the estimate is the one running the install. We protect floors and any belongings near the access point.

Prep. If old insulation is coming out, that happens first. Vacuum trucks, contained removal, no fiberglass dust through your house. If we’re spraying over clean joists, we mask off penetrations and prep the substrate.

The spray. Two-part foam mixes at the gun and expands on contact. Open-cell expands roughly 100x in seconds. The crew works in passes, building up to the spec’d depth. The foam is tack-free in minutes and fully cured within hours.

Cure and re-entry. You’ll need to be out of the attic and ideally out of the house for the spray window itself, usually 4 to 8 hours depending on the size of the job. After full cure (typically same day), the space is safe to re-enter.

Final walk. Your crew lead walks the finished job with you before they leave. We show you the coverage at every gap, penetration, and edge. If anything isn’t right, we fix it before we go.

Total time on a typical Austin attic: one full day for most spray foam jobs. Bigger attics or jobs with removal first run two days. We tell you which bucket your job falls in at the on-site estimate, so you can plan your day before we ever show up to do the work.

What Changes After Installation

Here’s what Austin clients tell us in the first month after install:

Drastically reduced AC runtime. Your unit won’t fight a 140° attic anymore. Most homes see 20 to 30 percent shorter cycle times.
Noticeable sound reduction. Street noise and weather sounds are muffled. Trucks, mowers, neighborhood noise all get quieter.
Improved indoor air quality. Less dust and allergens entering through structural gaps. The attic stops pulling outside air through every leak point in the envelope.
Pest deterrence. Sealed entry points mean fewer bugs and rodents finding their way in.

Spray foam insulation Austin install — H&O Insulation crew

Same crew. Same six steps. Every job.

Free estimate → on-site inspection → evaluation → pre-walk → install → post-walk. Whether you’re booking a top-off in Cedar Park or a full reinstall in Bee Cave, every H&O job runs the exact same way. Same crew lead from the estimate visit to the final walk. No handoffs. No surprises.

Spray Foam Questions Austin Homeowners Ask

Do I need a vapor barrier with spray foam?ryan@inkbyt.com2026-05-12T05:30:04-05:00

Do I need a vapor barrier with spray foam?

Closed-cell foam is its own vapor barrier. Open-cell is vapor-permeable, which is usually what you want in an Austin attic so the assembly can dry to the inside. We’ll talk through which fits your build.

Does spray foam off-gas?ryan@inkbyt.com2026-05-27T13:33:58-05:00

Does spray foam off-gas?

Not after it cures. The chemistry is fully reacted within a few hours of install. Once cured, foam is inert. Re-entry timing on install day is about the cure window, not long-term safety.

Can you spray over my existing fiberglass insulation?ryan@inkbyt.com2026-05-12T05:29:24-05:00

Can you spray over my existing fiberglass insulation?

Sometimes. If it’s dry, clean, and in good shape, we can spray over it. If it’s compressed, contaminated, or wet, it has to come out first. We make the call on-site after we inspect.

How long does spray foam last?ryan@inkbyt.com2026-05-12T05:30:23-05:00

How long does spray foam last?

The foam itself doesn’t degrade. It’s still doing its job 30, 40, 50 years later. Our workmanship is warrantied for 2 years. The foam manufacturer carries a limited lifetime warranty on the product.

Will spray foam mess up my roof warranty?ryan@inkbyt.com2026-05-12T05:31:05-05:00

Will spray foam mess up my roof warranty?

Some roof warranties have language about attic ventilation. We can spray your attic without voiding most modern roof warranties, but if you’re concerned, send us your roofer’s warranty doc and we’ll read it before we quote.

What if I have rodents or moisture damage in the attic?ryan@inkbyt.com2026-05-12T05:30:50-05:00

What if I have rodents or moisture damage in the attic?

We handle removal and cleanup before spray. The attic has to be clean and dry before foam goes in. If you’ve got an active rodent issue, that gets handled first by a pest control company, then we come in.

Will spray foam make my house too tight?ryan@inkbyt.com2026-05-12T05:31:37-05:00

Will spray foam make my house too tight?

Not on its own. Modern HVAC systems are designed to provide enough fresh air for a sealed envelope. If your home is older and you’re concerned about ventilation, we can talk through whether a fresh-air intake or ERV makes sense for your build. Most homes don’t need one.

Are you licensed and insured?ryan@inkbyt.com2026-05-13T04:41:59-05:00

Are you licensed and insured?

Texas does not require a state license for insulation work. We carry $1M / $2M general liability through Travelers. Certificates available on request.

Why do most spray foam insulation Austin jobs use open-cell instead of closed-cell?ryan@inkbyt.com2026-06-19T12:02:52-05:00

Why do most spray foam insulation Austin jobs use open-cell instead of closed-cell?

Open-cell is the right fit for most Austin attics because it lets the roof assembly dry to the inside, which matters in a humid climate where trapped moisture causes problems. It is also more cost-effective per board foot and gives you the R-value an attic needs without overspending. Closed-cell has its place, metal buildings, crawl spaces, and anywhere you need a built-in vapor barrier or added structural strength, and it runs about R-6.5 per inch. We pick the one that fits your build and tell you why on the walkthrough.

Do you give a free spray foam insulation estimate near me?Home & Office Insulation2026-09-09T12:34:42-05:00

Do you give a free spray foam insulation estimate near me?

Yes. Every spray foam estimate is free and done on-site, not over the phone. The lead installer comes to the house, gets in the attic, and checks three things: what insulation is there now and whether it has to come out, how the roof deck and ventilation are set up, and where the ducts run. Then he measures and gives you a written price by foam type and depth. No pressure, no “sign today” discount. The estimate usually takes 30 to 45 minutes. We run them across Austin, Round Rock, Cedar Park, Pflugerville, Buda, and Kyle.